ποΈ QLD at a glance
Regulator: Workplace Health and Safety Queensland (WHSQ)
Who issues the card: Your RTO. In Queensland the card is issued by the WHSQ-approved RTO that trained you, not by WHSQ.
Safety law: Work Health and Safety Act 2011 (Qld) and Work Health and Safety Regulation 2011 (Qld), Part 6.5
Unit of competency: CPCWHS1001 Prepare to work safely in the construction industry (supersedes CPCCWHS1001)
Capital: Brisbane
Online delivery: Live virtual classes only, with approved RTOs
WHSQ conditions allow general construction induction training to be delivered face-to-face, or through connected real time delivery (live video) where the RTO is approved to do so. The same conditions require WHSQ-approved trainers, a maximum of 15 students per trainer, a minimum course length of 4.5 hours and a mandated assessment. Self-paced online courses are not the same as connected real time delivery.
How the White Card works in Queensland
In Queensland the White Card is called a general construction induction training card. It used to be a white card, and before that a blue card. Cards are issued by RTOs that have an agreement with WHSQ, when a student successfully completes the course (CPCWHS1001 or the earlier CPCCWHS1001).
WHSQ sets conditions for these RTOs. They must notify WHSQ of each course at least 24 hours before it starts, use WHSQ-approved trainers, cap classes at 15 students per trainer, run the course for at least 4.5 hours and use a mandated assessment. Training can be face-to-face or connected real time delivery, which is a live video class with a trainer, where the RTO is approved for it.
Because the RTO issues the card, there is no separate application to WHSQ. Each RTO sets its own course fee. WHSQ publishes a list of approved RTOs on its general construction induction page.
White Card Requirements in Queensland
Complete CPCWHS1001 (or the superseded CPCCWHS1001) with an RTO approved by WHSQ to deliver general construction induction training
The course must run for at least 4.5 hours, with no more than 15 students per trainer
Have a Unique Student Identifier (USI), which is needed for all nationally recognised training
Bring the identity documents your RTO asks for
The RTO issues your general construction induction training card when you pass. Keep it with you whenever you are on site
What Workplace Health and Safety Queensland (WHSQ) does
Workplace Health and Safety Queensland (WHSQ) administers the WHS Act 2011 and WHS Regulation 2011 in Queensland. For White Cards, it approves the RTOs and trainers allowed to deliver general construction induction training, sets their delivery and assessment conditions, and publishes the approved RTO list.
The 2-year rule in QLD
Queensland uses the model WHS Regulations (Part 6.5). A business (PCBU) must not direct or allow a worker to carry out construction work unless the worker has completed general construction induction training. If the worker trained more than 2 years ago, they must also have done construction work in the past 2 years.
A White Card is general induction only. Every site still needs its own site-specific induction, and some tasks need a separate high risk work licence.
Replacing a lost or damaged card
Replacements are handled by the RTO that issued your card. WHSQ recommends keeping a note of your RTO's details and a copy of your card for this reason. Keep your statement of attainment too, because it may be needed to replace the card.
How to Get Your White Card in QLD
Step 1: Prepare
Study for the assessment using our free practice test with 505+ questions. Focus on WHS legislation, hazard identification, safety signs, PPE and emergency procedures. Our study guide and glossary cover the key terms.
Step 2: Enrol with an RTO
Choose a registered training organisation (RTO) that can deliver CPCWHS1001 in QLD. Training is face-to-face, or a live virtual class with an RTO approved for that method in QLD. Course prices are set by each RTO, so compare a few before you book.
Step 3: Complete Training
Attend the course and pass the assessment. Have your Unique Student Identifier (USI) ready and bring the identity documents your RTO asks for. Under the national unit, assessment must use a range of methods, including practical demonstration and oral and written reporting.
Step 4: Receive Your Card
Who issues it: Your RTO. In Queensland the card is issued by the WHSQ-approved RTO that trained you, not by WHSQ. Keep your statement of attainment (or statement of training) safe, as you may need it on site while you wait and to replace a lost card later.
What the course covers and what to expect
The content is set by the national unit CPCWHS1001, so it is the same in every state. According to the unit's published knowledge evidence, you need to show you understand:
- Basic duty of care, and the roles, rights and responsibilities of businesses and workers under the WHS (or OHS) law that applies where you are
- The meaning of "hazard" and "risk", and the five risk management steps in order: identify the hazard, assess the risk, consult and report, control the hazard, review
- Common construction hazards, including asbestos, confined spaces, electricity and power lines, excavations and underground services, dust, falling objects, hazardous substances, heat and cold, manual handling, noise, plant and mobile plant, unplanned collapse, UV radiation, and working at heights including scaffolding
- Construction safety signs and tags: emergency information, fire, hazard (danger and warning), regulatory (prohibition, mandatory, limitation) signs, and danger and out-of-service tags
- The purpose of job safety analyses (JSAs), safe work method statements (SWMS) and safety data sheets (SDS)
- The roles of first aid officers, health and safety representatives, WHS committee members and supervisors
- Responding to incidents and emergencies, accessing first aid, and the types and uses of fire blankets, fire extinguishers (water, CO2, powder, foam), hose reels and mains
On the day, expect to identify and orally report two construction hazards and explain how to control them. You will also explain the meaning of safety signs and correctly fit eye protection, hearing protection, a hard hat and a high-visibility vest, shirt or jacket. The assessor must watch these tasks in person or through live audio and video. Practise with our flashcards and WHS legislation questions.
Prepare for Your QLD White Card
Practice with 505+ realistic questions covering all 12 topics. Free, no sign-up required.
Start Free Practice TestQueensland White Card FAQ
Who issues the White Card in Queensland?
The RTO that trains you. Queensland general construction induction training cards are issued by WHSQ-approved RTOs when you pass, so you do not apply to WHSQ separately.
Can I do the Queensland White Card online?
Only as a live video class. WHSQ allows connected real time delivery, a live online class with a trainer, where the RTO is approved for it. Otherwise training is face-to-face. Courses must run for at least 4.5 hours with no more than 15 students per trainer.
Is the old Queensland Blue Card still relevant?
WHSQ explains that the general construction induction training card was previously called a white card, and before that a blue card. Today the card is issued after completing the national unit CPCWHS1001.
How much does a White Card cost in Queensland?
Each RTO sets its own course fee. WHSQ publishes a list of approved RTOs you can compare.
How do I replace a lost Queensland White Card?
Contact the RTO that issued your card. WHSQ recommends keeping your RTO's details and a copy of your card in your records for this reason.
White Card in Other States
Compare every jurisdiction side by side in our White Card requirements by state guide.
Sources and further reading (last reviewed November 2026)
WHS rules differ between states and change over time. Where this page states a legal or regulatory fact, it is based on the official sources below. If anything here disagrees with them, the official source wins. You can read how we check and correct our content.
- WorkSafe Queensland: General construction induction
- WorkSafe Queensland eSAFE: New conditions for white cards in Queensland (November 2022)
- Business Queensland: General construction induction
- training.gov.au: CPCWHS1001 Prepare to work safely in the construction industry
- Unique Student Identifier (USI): usi.gov.au